In order to meet our customer’s demands, we take part from early stages of development to mass production – together with our valued customer.
We are welcoming new joint research and development ideas.
Case 1: Development of Filter-Shaped Integral Injection Molding Technology
Many of the filter-shaped parts in automobiles are made from mesh-typed plastic injection molded parts.
At Newton, we were able to develop an integral injection molding technique for filter-shaped parts that allows to further improve the performance of the filter itself.
Cylindrical Filter
(#100 equivalent)
Outside Diameter: φ10.0
Inside Diameter: φ8.5
Height: 9.0
In-Line Filter
(#200 equivalent)
Outside Diameter: φ6.0
Inside Diameter: φ3.0
Case 2: Development of Punching Process through Hard Resin
Newton developed punching processing technique for products that are difficult to be injected molded due to fine details and/or due to thermosetting polymer characteristics.
*Currently pending for patent: blade type and manufacturing method of hard resin processed part
Example of Punching Process
Newton originally designed progressive pressing machine
Case 3: Mold technology of removal by cavity rotation
This technology will provide the cost reduction for the unit price of screw products, worm products and the investigation cost.
Inside screw type
Worm
- Cost reduction with shorten cycle time.
- Stable production with mold miniaturization.
- Shorten leadtime of mold fabrication with the accuracy adjustment by screw core internal processing.
This technology is available not only Japan factory but also Philippines and Thai factories.